Caliper: Headphone Measurement Apple

Caliper: Headphone Measurement

Measure headphones, verifiably

Overview

Version:
1.0
Last updated: 2026-09-19
Ranking
#1,168,813 ▼ 8,664
Overall

Features & Capabilities

Measure a headphone on a fixture and know whether to believe the result. Caliper spends its captures working out how much of what you see is real.

Caliper measures headphones on an acoustic fixture and produces a result a stranger can check.

Any app can draw a curve. The hard part is knowing whether the same headphone, measured again, would give you the same curve — because if it would not, the differences you are reading belong to how it was sitting, not to the headphone. So Caliper asks for a few captures instead of one, and spends them establishing its own error budget.

WHAT IT DOES

• Drives a logarithmic sine sweep through one earcup at a time and records both capsules. • Applies your rig's per-capsule calibration, bound by capsule serial, so a calibration from another fixture cannot be used by mistake. • Refuses a capture that fails its own quality gates: signal-to-noise, distortion, clipping, and whether the headphone is actually sealed on the fixture at all. • Selects the medoid of a set of seatings rather than averaging them. An average is a curve no seating produced. • Reports the spread across seatings in four bands, so a curve arrives with its uncertainty rather than without it. • Distortion comes free with the sweep. The harmonics arrive before the linear impulse and cost no second pass.

THE DUPLICATE PAIR

Two sweeps of one ear with nothing touched in between. Any difference between them is the instrument and the room, not the headphone — which makes it the smallest difference the run is entitled to call real. Every verdict afterwards is measured against it, and a run will not complete without one.

SEATINGS

Take the headphone off, put it back on, measure again. The spread between seatings is the honest uncertainty of the measurement, and it is usually larger than people expect. How many you need is derived from how much yours actually disagree — an easy headphone may need one, a difficult one eight.

PROVENANCE, NOT A BADGE

Every measurement records its rig, its coupler baseline, its calibration, its analysis chain and its drive level. The tier — Screening, Repeatable, Reference — is computed from what the file contains and is never asserted. Anyone holding the bundle can recompute every stored number from the archived impulse responses, including ours.

The app says what the run still needs and what to do next, right above the measure button. Captures may be taken in any order, and each one counts for whatever it satisfies.

RIGS

Profiles ship for the miniDSP EARS Pro and the original EARS, GRAS 43AG, Brüel & Kjær 5128, RA0402 and the KB-series. A rig whose thresholds have not been measured on that fixture is marked DECLARED rather than CHECKED, because naming a rig and verifying against one are different claims and the app will not blur them.

GETTING YOUR MEASUREMENT OUT

• squig.link / CrinGraph text files, so your curve can be compared where people actually compare curves • A measurement bundle that re-verifies every published number from the archived impulse responses • PNG carrying its provenance: rig, fixture and calibration serials, analysis chain, seating count • Hear this in Attune, to listen to the headphone you just measured

There is also a simulated fixture for trying the app without hardware. Every capture it makes is stamped, and exporting a run that holds one is refused.

FREE, AND NOT A TRIAL

Caliper is free with no in-app purchases and no paid tier. A verification tool a skeptic must pay to use is not a verification tool.

PRIVACY

Caliper requests no network capability at all. Your measurements are files on your own device, and the app has no route to send them anywhere.

User Growth & Download Statistics

App
By:
Warren Labs
Version:
1.0 Last updated: 2026-09-19
Version code:
891604705
Creation date:
2026-09-19
Bundle ID:
com.warrenlabs.caliper
Compatible devices:
Size:
4.22MB
Email:
ja*****@jameywarren.com
Website:
Privacy policy:
Support:
Full description:
See detailed description
Source:
Apple Apps Store
Data ingested on:
2026-11-16
Compare stats and ranking:

Contact the developer

Chrome-Stats does not own this Apple app. Please use these information below to contact the Apple app developer.

Developed by:
Warren Labs
Apple Apps Store
https://apps.apple.com/us/app/caliper-headphone-measurement/id6813610070
Email:
ja*****@jameywarren.com
Website:
https://warrenlabs.com/caliper

Best Caliper: Headphone Measurement Alternatives

Here are some Apple apps that are similar to Caliper: Headphone Measurement: