RS-R30I

"RS-R30I" is a remote control application for the ICOM Wideband Handy Receiver "IC-R30." You can operate and change the receiver’s settings using an iPhone or iPad, and you can also check its settings.

Device requirements: iOS version 9.0 or later for 64 bit CPU models.

Supported receiver: Icom IC-R30

Refer to the instruction manual for details.

NOTE:

• The RS-R30I does not guarantee compatibility with all iPhones and iPads. It may not work, depending on its OS version, installed applications, and so on.

• Confirm the IC-R30's Serial port function is set to"CI-V (Echo Back OFF)" ( [MENU] > Bluetooth Set > Data Device Set > Serialport Function )

• Bluetooth LE is used to connect with the IC-R30 and it is a slow data transfer. So there may be a time delay between the receiver’s operation and the display on the data device. In addition, depending on the receiver environment, it may not be able to operate properly.

• Bluetooth may be disconnected in the following cases: · The screen of the device is locked. · The application is running in the background mode. · Wi-Fi is enabled. · Connecting or removing a Bluetooth headset.