Fraction Calculator, Feet Inch
Your phone’s calculator says 20.333 ft. This one says 20′ 4″. Feet-inch-fraction math, live diagrams, 3D previews and IRC code checks for the job site.
Construction Calculator is a construction calculator that works the way you measure: in feet, inches and fractions. Carpenters, framers, remodelers, contractors and DIY builders use it to lay out stairs, frame roofs, estimate concrete and materials, and check work against building code, on iPhone and iPad.
Enter 12′ 6-3/8″ + 7′ 9-5/8″ and get 20′ 4″, not 20.333 ft. No converting to decimals and back, no pencil math on a 2×4.
FEET-INCH-FRACTION CALCULATOR
• Add, subtract, multiply and divide feet, inches and fractions, or work in metric
• Set fraction precision from 1/2″ down to 1/64″
• Every answer also shown in inches, feet, yards, meters, centimeters and millimeters
• Area and volume from dimensions in one step
• Paperless tape keeps every calculation; memory registers store lengths
• Works like a tape measure calculator: read a measurement off the tape and enter it exactly as marked
• Square footage, board feet and cubic yards from feet-inch dimensions
SEE THE JOB BEFORE YOU CUT
• Each tool draws a live, to-scale diagram with your dimensions as you type
• Turn a 3D preview of slabs, steps, footings and columns to check the shape
• Stair, rafter, slab and arc drawings are labeled in feet and inches
STAIR CALCULATOR
• Number of risers and treads, riser height and tread depth from floor-to-floor rise
• Stringer length, total run, incline angle and stairwell opening with headroom
• Riser-limited layout to stay under code limits; baluster spacing for railings
ROOF FRAMING AND RAFTER CALCULATOR
• Common, hip, valley and jack rafter lengths from pitch and span
• Plumb and seat cut angles, overhang, and irregular hips with unequal pitches
• Rake wall stud heights, crown molding and compound miter saw settings
BUILDING CODE CHECKS
• Stairs, guards and handrails, egress windows, light and ventilation (IRC)
• Footing size, anchor bolts, grading, deck joist spans and cantilevers (IRC)
• Accessible ramps (ADA), drain pipe slope (IPC) and exhaust fan rates
• Each check shows pass or not compliant, with the code section it uses
104 MATERIAL ESTIMATORS
• Concrete: slabs, footings, walls, columns, steps, rebar, mesh, bag counts and ready-mix
• Masonry: brick, concrete block, pavers, mortar, grout and stucco
• Framing and decks: studs and plates, joists, sheathing, deck boards, fences, cut lists
• Roofing: shingles, nails, starter strip, ridge cap and underlayment
• Interior: drywall, insulation, paint, tile, flooring, carpet and trim
• Exterior and site: siding, gutters, gravel, topsoil, sod, excavation and asphalt
• Electrical and plumbing: voltage drop, wire size, pipe volume and duct airflow
• Business: markup and margin, labor cost, sales tax and lumber pricing
• Add your own waste allowance; bag counts use published product yields, and sources are listed
KEEP YOUR WORK TOGETHER
• Save results from the tape into project notes
• Add photos, files and voice dictation to notes, then share them
• Star the tools you use most to keep them in your Toolbelt
Built for the US: feet and inches by default, IRC and ADA references, and US product sizes. Metric is one switch away.
Results are for planning and ordering. Your plans, local code and product labels take precedence.
SUBSCRIPTION
Construction Calculator Pro unlocks every feature. Choose an annual subscription with a 2-week free trial, or a one-time Lifetime purchase. The subscription renews automatically unless canceled at least 24 hours before the end of the current period. Manage or cancel it anytime in your Apple Account settings.
Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/