FitUp: Pipe Offset Calculator Apple

FitUp: Pipe Offset Calculator

Rolling, Take-Out & Cut Length

Overview

Version:
1.0
Last updated: 2026-11-01
Ranking
#1,852,669 ▼ 20,847
Overall

Features & Capabilities

Type the offset, read the cut. Both take-outs and both weld gaps are already off the travel, rounded once to the 1/16 you will mark on the pipe.

The cut length for your offset, take-outs and gap already off, so you cut it once.

Most offsets still get worked out on a piece of cardboard: offset times 1.414, minus two take-outs, minus two gaps, then turn 11.14 into a mark on the tape and hope the cut is right. FitUp does that math the same way every time. Type the offset, pick the angle, the pipe size, and the fitting, and read the cut length to the nearest 1/16 inch, with the travel, the run, and each allowance listed under it and the formula on screen so you can check it.

SIMPLE OFFSETS, ANSWERED AS A CUT Enter the offset center to center. FitUp returns the travel (the offset divided by the sine of the angle), the run, the take-out for each fitting, the gap for each joint, and the cut length. The offset triangle is drawn and labeled, and the formula line shows the multipliers, 1.414 and 1.000 for a 45. Offsets at 45 degrees are free and unlimited. Pick 11.25°, 22.5°, 30°, 60°, or a custom angle from 1 to 89 degrees and the diagram draws for it right away; Pro shows the travel, run, and cut length for every one of them, using a 90 elbow cut down to that angle. Pick no fittings for center to center.

ROLLING OFFSETS FROM RISE AND ROLL Type the rise and the roll. FitUp works out the true offset (the square root of rise squared plus roll squared), then the travel, run, and cut length at your angle, and draws the box the pipe runs through. Ten rolling offsets at 45 degrees are free each month; the count left sits next to the tool. Pro removes the limit and adds setback mode: type the run you have, and FitUp solves the fitting angle.

TAKE-OUTS FROM 1/2 TO 12 INCH The take-out chart lists center-to-end values for 90 long radius, 45 long radius, and 90 short radius (1 inch and up) butt-weld elbows from 1/2 to 12 inch pipe. They are marked as defaults, because fittings vary by maker. The 1/2, 3/4, and 1 inch rows are free to read. Pro opens every size, lets you edit any value or type in threaded and socket-weld take-outs, and sets the weld gap per joint (1/8 inch by default for welded trades).

JOBS AND CUT LISTS The offset you try during setup is already saved as the first cut of Job 1. Save each calculation to a job, and the cuts stack up as a cut list you can read at the saw. One job with any number of cuts is free. Pro keeps a job for every site and sends a cut list as text or as an image to the foreman or the shop.

FRACTIONS YOUR TAPE CAN READ Answers come out in fractional inches rounded once to the nearest 1/16, or in decimal inches to three places, with the exact decimal in the formula line. Pro adds 1/32 rounding and millimeters.

WHAT IS FREE Unlimited 45 degree simple offsets with the full answer, diagram, and formula. Ten rolling offsets at 45 degrees every month. The take-out chart for 1/2, 3/4, and 1 inch. One saved job with any number of cuts. Fractions to the 1/16, or decimals. No account and no ads, and your jobs stay on your iPhone.

CHECK BEFORE YOU CUT FitUp is a layout calculator. It does not inspect fittings or check code. Verify measurements and fitting dimensions before cutting.

PRO SUBSCRIPTION FitUp's Pro subscription is auto-renewable. Two options: Pro Yearly at $29.99 per year, which starts with a 7-day free trial, and Pro Monthly at $4.99 per month with no trial. Payment is charged to your Apple Account when you confirm the purchase, or when the free trial ends if you do not cancel before then. The subscription renews automatically at the same price and period unless you turn off auto-renew at least 24 hours before the end of the current period. You can manage or cancel it in Settings > Apple Account > Subscriptions on your iPhone. Any unused part of a free trial is forfeited when you buy a subscription. Prices are in U.S. dollars; the App Store shows your local price.

Terms of Use: https://fitup-app-chi.vercel.app/terms Privacy Policy: https://fitup-app-chi.vercel.app/privacy

User Growth & Download Statistics

App
By:
Michael Alcalde
Version:
1.0 Last updated: 2026-11-01
Version code:
892618955
Creation date:
2026-11-01
Bundle ID:
com.fitupcalc.ios
Compatible devices:
Size:
9.47MB
Website:
Privacy policy:
Support:
Full description:
See detailed description
Source:
Apple Apps Store
Data ingested on:
2026-11-20
Compare stats and ranking:

Contact the developer

Chrome-Stats does not own this Apple app. Please use these information below to contact the Apple app developer.

Developed by:
Michael Alcalde
Apple Apps Store
https://apps.apple.com/us/app/fitup-pipe-offset-calculator/id6819633578
Website:
https://fitup-app-chi.vercel.app

Best FitUp: Pipe Offset Calculator Alternatives

Here are some Apple apps that are similar to FitUp: Pipe Offset Calculator: