DeltaDirect

Wireless control at your fingertips, with your fingertips.

Free your system tuning from the laptop and the cables! DeltaDirect works in conjunction with AudioCore to give you real time tuning and monitoring of all DSP functions. Adjust filtering, tweak delays and gains, mute individual or groups of channels, and monitor the overall system performance with our beautifully simple intuitive interface that connects to your Delta DSP amplifiers via any standard WiFi router.

Configure grouping of inputs and outputs across the entire system, load your speaker presets (compatible with all XTA 4 Series presets, including FIR presets) via AudioCore, and then cut loose to fine tune from the best position.

Intelligent copy and paste functionality plus advanced grouping architecture means you can connect independently to any network of amplifiers and retrieve the grouping structure, as well as honouring 
any system security in place.

Key Features *Streamline elegant interface for the fastest simplest use, even under show pressure! *System overview showing all amplifiers, with metering, temperature monitor and quick access to key device settings like standby, AES switching, bridging and amp name *Configure groups for absolute EQ control or relative gain and limiter thresholds *Select groups with fast access to group controls and direct access to group members all on one screen *One touch to access individual amplifiers DSP - mutes, gains, polarity and delays *Adjust all EQ via either direct entry, or full screen curve dragging with intelligent reordering of EQ info plus optional auto-lock of drag modes (Freq or Gain) to enable precise adjustment *Configure all power amp and aux routing, matrix mixing, network audio inputs and output source as well as local ganging and naming

Important Notes *DeltaDirect is compatible with MC² Audio: Delta80-DSP® and Delta100-DSP® as well as with XTA Electronics Ltd: DPA80® and DPA100® *DeltaDirect will work on any iPad® that is running iOS12® *You will need a functioning WiFi connection with your amps (we suggest using DHCP-Mode on your Router rather than Static-IPs) *In order to use RS485 you will need a Serial Device-Server (e.g. MOXA - NPort 5150) *RS485-Relay mode (TCP Master + linked RS485 devices) is not supported