Pipe Rolling Offset Calculator Android

Pipe Rolling Offset Calculator

Pipe offset and rolling offset math, plus cut length with ASME B16.9 take-outs.

Overview

Features & Capabilities

Offset and rolling offset are free, with no limits, no ads and no account. Type in feet, inches and sixteenths, or in millimeters, and get the travel, run and setback to mark on the pipe.

Free
- Simple offset: enter any two of set, run, travel and angle. Quick picks for 11.25, 22.5, 30, 45 and 60 degree fittings.
- Rolling offset: enter rise and roll, plus the fitting angle or the run. You get travel (center to center), true offset, setback and roll angle.
- Every answer shows the formula it used, next to a drawing that labels each field.
- A keypad built for tape measure numbers: feet and inch marks, 1/2, 1/4, 1/8 and 1/16 keys, and a delete key. Answers to the nearest 1/16 with the decimal inch beside it, or in mm.

Pro, one-time purchase
- Cut length: center to center minus the take-out of each elbow and the weld gaps, for a piece with one or two elbows.
- Take-outs for LR 90, LR 45 and SR 90 butt weld elbows, NPS 1/2 to 12, from the ASME B16.9 center-to-end table. Other angles use long radius geometry, R × tan(θ/2), and each result says which source it used.
- Weld gap starts at 1/8 inch and can be changed to match your joint.

Pay once and keep it
- No subscription. You pay once and Pro stays yours.
- No account and no ads. The app works offline and does not ask for internet access.
- New phone? Sign in to Google Play with the same account and Pro comes back by itself when you open the app. There is also a Restore purchase button in the menu.

Take-out can differ a little between fitting makers. When the B16.9 table and the geometric value differ by more than 1/32 inch, the app shows both. Check against the fittings in your hand before you cut.

User Growth & Download Statistics

App
By:
DEMETIO, JSC.
Downloads:
31 20
Version:
0.1.3 Last updated: 2026-11-05
Version code:
6
Creation date:
2026-11-02
Publisher country:
VN VN
Permissions:
  • com.android.vending.BILLING Low risk
  • android.permission.ACCESS_NETWORK_STATE Safe
  • com.android.vending.CHECK_LICENSE Safe
  • com.notchwork.pipefit.DYNAMIC_RECEIVER_NOT_EXPORTED_PERMISSION
Size:
2.40MB
Email:
no*****@demetio.com
Website:
Privacy policy:
Full description:
See detailed description
Source:
Google Play Store
Data ingested on:
2026-11-22
Compare stats and ranking:

Contact the developer

Chrome-Stats does not own this Android app. Please use these information below to contact the Android app developer.

Developed by:
DEMETIO, JSC.
Google Play Store
https://play.google.com/store/apps/details?id=com.notchwork.pipefit
Email:
no*****@demetio.com
Website:
https://notchwork.demetio.app/rolling-offset/

Best Pipe Rolling Offset Calculator Alternatives

Here are some Android apps that are similar to Pipe Rolling Offset Calculator: