Conduit Fill: Wire Calculator Apple

Conduit Fill: Wire Calculator

By: Soxoa LLC App
Jobsite wire fill estimate

Overview

Version:
1.0.0
Last updated: 2026-09-29
Ranking
#2,241,209 ▲
Overall

Features & Capabilities

Estimate wire fill for EMT, PVC and IMC using published geometry. View the cross-section and reverse size. Planning only; verify the adopted electrical code.

Conduit Fill is a jobsite planning estimate for how much of a conduit’s internal area a pull will occupy.

Pick EMT, PVC Schedule 40, or IMC, a trade size from ½″ to 4″, one stranded copper wire size from 14 AWG to 4/0, THHN or THWN-2, and a count from 1 to 40. The app shows fill percent and an illustrative cross-section drawn on the phone.

Planning estimate from published wire/conduit geometry. Not a substitute for the electrical code or a licensed electrician.

WHAT IT USES Wire diameters come from Southwire SPEC 10025 and SPEC 10000. Conduit bores use Allied/Atkore EMT nominal dimensions, Wheatland IMC nominal dimensions, and CANTEX Schedule 40 minimum bore. Areas are calculated from those diameters. Fill is wire area × count ÷ conduit internal area. Sources and assumptions are available in Settings.

Only individual stranded copper wires of one size are supported. Count every wire, including neutral and grounding wires. Mixed sizes, bare grounds and cable assemblies need a separate calculation. This app does not check ampacity, derating, pulling tension, jamming, bends or special fill exceptions.

THE 40% FIGURE For three or more conductors the app marks a common 3+ conductor guideline — verify in the adopted code. One- and two-conductor planning figures are labeled the same way. Nothing in this app is a determination that a pull “meets code.”

FREE One fill check per session, three per day. Configure the pull, tap Check fill, and read the percent plus the cross-section.

LIFETIME — $4.99 Unlimited fill checks and reverse trade size with one payment. Reverse size shows the next trade size and the smallest fitting size at or above your selection. There is no code-edition selector or code approval claim.

REVERSE SIZE — $2.99 Optional one-time add-on for the next trade size and smallest fitting size at or above your selection. Included with Lifetime. Fill checks retain the free limits unless Lifetime is purchased.

PRIVATE No account. No tracking. No ads. Purchases go through Apple. Restore purchases any time from Settings.

Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/ Privacy Policy: https://soxoa.com/conduitfill/privacy

User Growth & Download Statistics

App
By:
Soxoa LLC
Version:
1.0.0 Last updated: 2026-09-29
Version code:
891240707
Creation date:
2026-09-29
Bundle ID:
com.soxoa.conduitfill
Compatible devices:
Size:
5.61MB
Website:
Privacy policy:
Support:
Full description:
See detailed description
Source:
Apple Apps Store
Data ingested on:
2026-11-08
Compare stats and ranking:

Contact the developer

Chrome-Stats does not own this Apple app. Please use these information below to contact the Apple app developer.

Developed by:
Soxoa LLC
Apple Apps Store
https://apps.apple.com/us/app/conduit-fill-wire-calculator/id6811293649
Website:
https://soxoa.com/conduitfill

Best Conduit Fill: Wire Calculator Alternatives

Here are some Apple apps that are similar to Conduit Fill: Wire Calculator: