FINOpti — Cut List Optimizer

FINOpti turns your cut list into an optimized cutting plan in seconds — so you get more parts from every sheet, waste less material, and cut with confidence. Built for carpenters, joiners, and cabinet makers working with plywood, MDF, melamine, and veneered panels.

ENTER A JOB IN SECONDS • Type panels on a big, glove-friendly keypad, or paste a cut list and let it fill the table. • Set your stock sheets, saw kerf, grain direction, and edge banding.

GET AN OPTIMIZED PLAN • The on-device engine nests your parts to maximize yield and minimize offcuts. • See every sheet laid out, with utilization, sheet count, and estimated cost.

CUT WITH CONFIDENCE • Cutting Mode guides you through the cuts one at a time, with the exact fence dimension for each — tap to mark each cut done. • The plan respects kerf and grain, so what you see is what you cut.

STAY ORGANIZED • Save jobs and reopen their plans anytime. • Track material stock and get a heads-up before you run low. • Bank your offcuts and reuse them on future jobs.

EVERY FEATURE INCLUDED — FREE No subscription, no unlocks, nothing held back: • Defect zones — mark knots and damage; parts are placed around them. • Move parts — drag a part; every move snaps to a cut the saw can make. • Rotate sheet — re-pack any sheet the other way with one tap. • Client quote — export a clean, professional quote PDF for your customer.

PRIVATE BY DESIGN • Works offline — no account, no sign-in, and we never ask for your name, email or phone. Nothing you enter ever leaves your phone. • Your jobs, materials, and offcuts stay on your device. • FINOpti is free and supported by a few clearly-marked sponsored cards on the Home, Jobs, and Inventory screens — never while you're cutting. They are not personalised and you are not tracked. • Available in English and Albanian, in millimetres, centimetres, or inches.

Cut smarter. Waste less.

— Privacy Policy: https://finopti.net/privacy