TranviLuse

TranviLuse is a two-gauge workshop toolkit for woodworkers, builders, and DIY makers. Everything runs offline on your device, and every result can be saved to the Archive or shared.

Timber Gauge. Enter a board's thickness, width, length, and quantity to read its board feet, cubic volume, and running length, with an optional price for a fast material cost. Switch to the Cut Planner, type your stock length, saw kerf, and a cut list, and it packs the pieces onto the fewest boards — drawing a cut diagram and the exact waste percentage.

Grade Gauge. Give it a rise and run to solve a ramp's angle, length, and slope, with an instant ADA 1:12 check. Roof mode turns an x-in-12 pitch into an angle and rafter length, and Stairs mode splits a total rise and run into step count, riser height, tread depth, and a comfort check.

Both gauges work in imperial or metric units, remember your saved calculations, and sit inside a brass, workshop-styled interface built for landscape. Measure the timber, plan the cut, and check the grade — all from one place.