GasTest Log: Pressure Test

Time the code hold on a wall-clock timer, snap start and end gauge photos, and export a code-cited PASS/FAIL certificate the inspector accepts. No manometer needed.

Run the gas piping pressure test and hand the inspector a certificate. GasTest Log times the code-required hold, captures a start and end gauge photo as proof, and exports a one-page, code-cited PASS/FAIL report — right from your phone.

It does NOT measure pressure. Your gauge does that. GasTest Log times the hold, documents what you read, and turns it into a clean certificate — so a missed inspector visit no longer means a re-trip.

HOW IT WORKS • Pick a code preset (residential 3 psi / 10 min, elevated 2-lb, 10 psi / 15 min, commercial, or custom). • Photograph the gauge to start a wall-clock countdown with haptic checkpoints — keep working, it holds time even with the screen off. • Photograph the gauge again at the end. Enter your start and end readings. • You attest PASS or FAIL. Export the certificate.

THE CERTIFICATE • Date, address, permit, technician, license, and company. • Gas type, medium, required pressure and hold, your actual hold time, and start/end readings. • Side-by-side start and end gauge photos as tamper-evident proof. • The governing code citation (IFGC 2021 / IRC / NFPA 54) and the AHJ acceptance line.

BUILT FOR THE TRADE • Works fully offline. No account, no sign-in, no cloud. • Camera + optional location only. Nothing leaves your phone. • No Bluetooth manometer required — use the mechanical gauge already on the pipe.

A TOOL, NOT A CODE AUTHORITY Test pressures and hold durations shown are the IFGC/IRC base-code default — local amendments vary, so always confirm with your AHJ. The app does not measure pressure or decide pass/fail; you read the gauge and attest the result.

PRO A one-time unlock — no subscription. Export the certificate PDF, add your company branding, and keep a saved history of every test. No ads. No tracking. No account.

Time it. Photo it. Prove it.