3D Print Assistant

Stop guessing slicer settings. Choose your printer, filament, and print goal - 3D Print Assistant gives you a sane starting profile in seconds.

Working slicer settings for your exact printer and filament — in under a minute.

Pick your printer, nozzle, material, and what you're actually trying to print. 3D Print Assistant turns that into an optimised slicer profile — layer height, speeds, temperatures, infill, supports, and more — organised to match the tab structure of Bambu Studio, OrcaSlicer, or PrusaSlicer so you can copy it over and hit print.

TWO MODES — YOUR CHOICE Simple mode gives you just the essentials. Switch to Advanced when you want the full picture, with every setting explained so you know what it does and why it's set that way.

WHAT'S INCLUDED • 64 printers across 12 brands — Bambu Lab, Prusa, Creality, Anycubic, QIDI, Voron, and more • 18 filament types — PLA, PETG, ABS, ASA, TPU, PA, PC, CF blends, and more • 9 nozzle types with compatibility checking — incompatible combos are flagged before you print • Pre-print checklist tailored to your exact material and config • Fully offline — no account, no subscription, no internet required

BUILT BY SOMEONE WHO USES IT 3D Print Assistant started because I couldn't find a structured way to pick the right settings for a new material or printer. So I built it. The recommendations draw on community knowledge, hands-on experience, and manufacturer defaults — a starting point you can trust, then tune to your exact setup. Every setting shows what it does and why it was chosen, so you stay in control.

Works with Bambu Studio, OrcaSlicer, and PrusaSlicer.