Waltero Setup

Set up and configure your Waltero water meter sensors on site. Connect, calibrate the meter reading, verify the cloud link, and check signal strength before you leave.

Waltero Setup is the companion app for installing and configuring Waltero smart water and utility-meter sensors in the field.

Built for installers and technicians, it guides you through the entire process — from scanning a sensor to confirming it's online and reporting readings to the cloud — in a few clear steps, with no technical setup required on site.

KEY FEATURES

• Guided setup — a step-by-step flow that takes a sensor from unboxed to connected. • QR pairing — scan the sensor to identify and pair it instantly. • WiFi or cellular — configure the sensor's connection over WiFi (with optional static IP) or the mobile network (APN). • Cloud connection test — verify the sensor can reach the cloud before you leave the site, so you never install a sensor that can't report. • Meter reading alignment — use the sensor's camera to frame the meter and confirm the reading is captured correctly and upright. • Signal mapping — check connection quality at the installation location, with AR-assisted mapping on supported devices. • My Devices — view and manage the sensors you've installed. • Multi-organization support — work across several organizations from one account.

A Waltero account is required. Waltero Setup is intended for professional installers configuring Waltero hardware.

Learn more at waltero.com