DuoTrip

Your tripmaster app for vintage car rally

The app includes two lines to display the total measurement and the section measurement. At the top there are total kilometers, time and average and at the bottom there are sections - kilometers, time and average. You start with the button at the top left. If you press it again, everything will stop (pause) and if you press it for a long time, everything can be set to 0. A reset button appears in the top line. The distance can be counted forwards and backwards using the slide switch at the top right. Green for counting forward and red for counting backwards. The second line has a reset button that sets the values ​​completely to 0. This button can be operated directly or via the mechanical smart button. Because it is used frequently, a layer of grease and sweat builds up on the touchscreen and leads to unreliable operation. The mechanical push button was developed for this purpose. The current speed and accuracy are displayed in the lower part. Because high accuracy puts a strain on the cell phone battery, you can use the slider to adjust the need. You can use the slide switch at the bottom left to switch between km and miles before starting (not during an active measurement!). The blue arrow indicates the GPS connection. If it is crossed out, no satellites will be received. Real time is displayed in the bar at the top. The Connect button at the top right is intended for the Smart Button. With the Connect Button it is connected via WLAN and the background of the time display turns green.

With the help of the VinCar Smart Button, the second line can be reset with a real push button. See www.vincar24.de