Virtual Thermal Printer

Virtual Thermal Printer is a utility for replacing a POS printer that prints receipts. For a description and a full list of supported commands see the description below.

Print receipts from POS applications that support ESC/POS printing over IP. Just power on the printer and configure the IP-address and port displayed in your POS application.

List of supported commands:

• ESC @: Initialize printer
• LF: Print and line feed
• GS !: Double-width and double-height
• ESC E: Turn emphasized mode on/off
• ESC -: Turn underline mode on/off
• ESC a: Align text (left, right and center)
• ESC i and ESC m: Partial cut
• GS B: Turn white/black reverse print mode on/off
• GS V: Cut paper (
• GS k: Print barcode (EAN8, EAN13, Code39)
• GS ( k: Print QR Code. Functions 169 & 180
• DLE EOT: Printer status (1..4)
• GS v 0: Print raster bit image

For more details on ESC/POS commands see https://reference.epson-biz.com/modules/ref_escpos/index.php?content_id=2

The following code-pages are supported:

• CP437: US ASCII
• CP850: Latin I
• CP852: Latin II
• CP858: Latin I + Euro
• CP860: Portugese
• CP863: Canadian-French
• CP865: Nordic
• CP866: Russian

Note: The content printed in the above screenshots is for illustrative purposes only. Depending on the POS system used, the output may vary. Please make sure your POS application supports ESC/POS commands before installing this application.