Фрезеровка детали

Milling a part

During milling, feed conversion: mm / min, mm / rev, mm / tooth.

Input:

1) Feed by choice in the drop-down list:
mm / min,
mm / rev,
mm / tooth

2) Optional:
revolutions (rpm)
cutting speed (m / min).

3) Number of teeth.

4) Cutter diameter (mm).

5) Length of passage.

6) Number of passes.

The calculation depends on the input:

input feed (mm / tooth) calculation feed (mm / min) and (mm / rev),
input feed (mm / rev) calculation feed (mm / min) and (mm / tooth),
input feed (mm / min) calculation feed (mm / tooth) and (mm / rev),

input speed (rpm) calculation cutting speed (m / min),
input cutting speed (m / min) calculation of revolutions (rpm),

The transit times are calculated.