Avicare

Avicare is a vehicle-mounted disinfection system to disinfect wheels and underbody to prevent the spread of avian flu through road transport and other diseases that could affect agricultural operations.
The Avicare application, when the user is connected wirelessly to the system installed on the vehicle, allows control and exchange with the on-board system.

Home tab:
Different information and actions are available:
- Vehicle registration to know which system the smartphone or tablet is connected to;
- Vehicle speed;
- Spraying “OFF” or “in progress”;
- Unblocking “OFF” or “in progress”. This function is activated automatically, it is transparent for the user and helps avoid clogging of the nozzles and the distribution circuit;
- Reheating “OFF” or “in progress”. Regulation is done automatically according to the liquid temperature and the setpoint values ​​configured by Avicare;
- Tank level, OK or Low level;
- Temperature of the liquid present in the tank;
- A “Start spraying” button to use to start disinfection of the lower parts of the vehicle. The button must be activated when stationary and then the user must then regulate the vehicle speed below 10km/h in order to properly disinfect the wheels and underbody of the vehicle. The cycle can be paused using the emergency stop button if there is an error in the system or if the set speed is not respected.
Popups may appear to communicate with the user, for example when an alarm / fault is present, if the GPS signal is not accessible or when an application update can be downloaded.

Contact tab:
A second tab called “Contact” allows you to contact Avicare after-sales service. It is possible to send a text message to Avicare or call them directly.

Settings tab:
The third tab corresponds to the settings. We find the following information there:
- My account allowing you to access your account information, change your password or request the deletion of your account. ;
- Alarms, to access the alarms present on the Avicare system;
- On boarding to review the tutorials appearing when you first start the application;
- Dark or light themes depending on user preferences;
- Configuration to have a view of the different versions of settings that have been installed in the on-board electronics as well as the configuration in use;
- About, to access the general conditions of use and legal notices;
- Traceability, to have a view of the traceability of operations, that is to say where and when the disinfection of the vehicle was carried out as well as having a history of the events which took place on the system;
-Maintenance, allowing you to launch maintenance mode if the user has the rights;
- System user manual;
- Application version.

Maintenance mode:
A user who has the rights and who launches maintenance mode via the "settings" tab sees their application home page evolve in order to access certain additional features.
In maintenance mode, here is the additional information available on the home page:
- Maintenance mode activated with an associated button allowing you to exit this mode and return to standard use;
- Self-test, in order to check each functionality independently and ensure that each sensor and actuator present is functional;
- Start unblocking, to check the unblocking cycle with the vehicle stationary;
In maintenance mode, after pressing “Start disinfection”, the cycle is activated without driving the vehicle. The goal is of course to check that this functionality is working correctly.