K2 HEAT360

Basic function and operating environment
- Step-by-step temperature control of heat-generating clothing
The temperature displayed in the application is measured by the temperature sensor built into the heating pad.
It is a temperature value, and the value measured after wearing the clothes is the temperature including the heat of insulation.

- Operating System: Android 4.3 Jelly Bean or higher
Environment: Bluetooth 4.0 / USB 2.0 or higher
RED LED: 4 steps (40, 45, 50, 55 ℃)
BLUE LED: Bluetooth connection confirmation display
Smartphone controllable distance: 10M
Temperature can be controlled with a USB module switch without a smartphone

Customers who purchase clothes with the K2 HEAT360 exclusive heating pad can use it according to the method below.

1. Prepare the K2 HEAT360 heating pad you want to connect near your smartphone.
2. The bluetooth of the smartphone must be kept on and it will automatically discover and connect to the K2 HEAT360.
3. If there are more than two products nearby, you can select the one you want from the Bluetooth category.
4. When the product connection is complete, the temperature control screen is displayed. Temperature can be controlled in 4 steps.
5. Even if the Bluetooth connection is disconnected, the heat continues at the last set temperature.
6. There is a pause function and it can be used selectively according to need.


[Notice]
- When adjusting the temperature, first set the lowest temperature of 40 degrees, and set it to an appropriate temperature considering your body temperature and ambient temperature.
- Based on the battery capacity of 10,000mAh, it can be used for about 8 hours at 40°C and 6 hours at 55°C. (It may vary depending on the ambient temperature)

※ If you have any questions while using the service, please send an e-mail to jokwag64@naver.com and we will guide you.