BtSerialUtility

This is a sample program for the Bluetooth-Serial Converter products RS-BT62 and conventional product REX-BT60 provided by Ratoc System.
It can be used with the following products.

RS-BT62 series
REX-BT60 series

The source code can be downloaded from the site below.
http://www.ratoc-e2estore.com/products/detail.php?product_id=133

This program configures RS-BT62 and REX-BT60 devices via Bluetooth and configures communication parameters for the RS-232C port.
It also provides the functionality of a terminal program.

・Bluetooth settings
Default settings, device name settings
PIN code setting for REX-BT60 Ver 4.77 only

・Setting the communication parameters of the RS-232C port
Baud rate, data bits, parity, stop bits

・Setting HID mode parameters
HID mode key press time, HID mode line feed conversion

・Example of connected devices
RS-232C devices such as barcode scanners, magnetic card readers, chemical balances, etc.

・Example of installation procedure
1. Connect the power adapter (DC5V) to the RS-BT62 device.
2. Enable the "Bluetooth" item from "Settings" on your device.
3. Tap "Bluetooth". Tap the RS-BT62 device (BT62-xxxx) to pair.
4. Run the app (BtSerialUtility).