M3 Cluster

This is a app that is dashboard for Tesla Model 3/Y.

If you need to install dashboard for your model 3/Y, download this right now!

[Features]

1. Eash installation!
- Just remove the OBD connector from the bottom of the rear air vent using the Y cable, connect the OBD device, and run the app.

2. Clean installation and removal!
- Because it connects to the OBD device wireless(bluetooth), installation and removal of the instrument panel is easy.

3. Various features and easy updates!
- Displays the speedometer(km or miles) and power meter, turn signal.
- Display average, instantaneous electircity efficiency.
- Display main battery temp, powertrain temp, motor temp and so on.
- What is my car's speed from 0 to 100 km/h?
You can check the 0 to 100 km/h performance.
- You can easily update from the Google Play Store anytime.


* You need an adapter cable and a Bluetooth OBD adapter to use this app.

* For reference, below are links to the OBD cable and OBD devices.

1) OBD Y(branch) cable
https://ko.aliexpress.com/item/1005003069207525.html

2) OBD Adapter
- vLinker FD : https://ko.aliexpress.com/item/1005005772163431.html
- vLinker MC : https://ko.aliexpress.com/item/1005005754387310.html

* List of supported OBD devices : vLinker FD, vLinker FD+, vLinker MC, vLinker MC+, OBDLink LX, OBDLinkx MX, OBDLink MX+(You can purchase it as a Bluetooth version. Either BT 3.0 or 4.0 is fine, but for cost-effectiveness, BT 3.0 is recommended.)

** After testing with all OBD devices, there is no difference in performance between devices.