側溝カットガイド｜斜め切りの寸法をカメラで計算

Cutting gutters and blocks at an angle.

This app uses your camera to align the angle and calculates the cutting length.

It can be used for cutting curbs, blocks, slabs, tiles, chamfering, and other materials that require an angle.

■ Only 3 ways to use it
1. Enter the width of the material (mm) and select both sides/one side
2. Hold the camera and align the lines on the screen with a string line or existing object
3. The angle and cutting length will be displayed

■ What it can do
・Connecting two pieces at a corner (both sides)
・Cutting only one side, such as a manhole (one side)
・Cutting at a slope
・Automatically calculates the deviation for the bottom surface and chamfer (marking correction value)
・Can measure from a photograph taken
・Pause the screen to align slowly
・Save measured values ​​with a memo. Can be called later

■ For on-site use
- Can be used even without a signal
- 6 languages ​​(Japanese, English, Vietnamese, Chinese, Portuguese, Filipino)

■ Caution
- When marking, leave a margin of a few millimeters to 1 cm, and adjust with the joint after cutting.
- There will be errors because the angle is adjusted with the camera. For important points, compare with actual measurements.