Electric Scan

Electric Scan turns your phone into a live window on your EV's high-voltage battery.

Pair it with the Electric Scan Bluetooth LE module, connect the module to your vehicle, and the app streams what the battery management system reports, refreshed several times a second.


CELL VOLTAGES

Every cell in the pack, read individually. Switch between a numeric grid and a heatmap that shows at a glance where each cell sits within the pack's own minimum-maximum range. The summary panel identifies the highest and lowest cell by number, the pack average, and the spread between them in millivolts.


PACK AND STATE

State of charge, state of health, total pack voltage, module temperatures, and 12 V system voltage, each on its own level bar.


DRIVE DATA

Motor RPM on a 270-degree gauge, actual against requested torque on a bipolar meter that separates drive from regeneration, and GPS speed from your phone.


TRIP RECORDER

Start a recording before you set off and the app samples speed, RPM, state of charge, and torque for the whole trip. Afterwards you get distance, top and average speed, peak RPM, and the change in state of charge, with a chart for each channel. Trips are stored on your device and you choose which ones to keep or delete.


G-FORCE METER

A live readout of acceleration, braking, and cornering forces measured by your phone's motion sensors, with a trail of recent movement and a peak hold.


LANGUAGES

Thai and English.


REQUIRES HARDWARE

Electric Scan is a companion app for the Electric Scan Bluetooth LE module and does nothing on its own. Without the module connected to a vehicle you will only see the connection screen.


IMPORTANT

Electric Scan displays the values ​​your vehicle makes available. It is a reference tool for the owner, not a repair tool, and it cannot repair or resolve high-voltage battery issues. The readings shown are preliminary reference information only and are not a substitute for an official diagnosis by an authorized service center or a qualified technician.