Universal Load Controller

Atorch DL24 & DL24P Electronic Load Controller - Professional Battery Tester App

Control your Atorch DL24, DL24P electronic load tester and battery analyzer via Bluetooth from your Android phone. Professional battery testing app for power supply testing, battery capacity testing, and DC load testing.

Supported Electronic Load Testers:
- Atorch DL24 (150W electronic load)
- Atorch DL24P (180W battery load tester)
- DL24-USB variants with PD3.0/QC4+ protocol support

Key Features - Battery Testing App:

Bluetooth Control & Monitoring
- Seamless wireless pairing with Atorch DL24/DL24P electronic loads (Android 5.0+)
- Remote mode switching: CC (Constant Current), CV (Constant Voltage), CR (Constant Resistance), CP (Constant Power)
- Real-time battery monitoring: voltage, current, power, capacity, energy consumption
- Device calibration and parameter adjustment from your smartphone

Advanced Data Logging & Analysis
- Real-time discharge curve visualization for battery analysis
- CSV data export for detailed battery capacity analysis
- Test session recording with timestamps
- Battery capacity meter with mAh/Wh tracking
- Historical test comparison and reports

Professional Load Testing Modes
- Constant Current (CC) mode - battery discharge testing
- Constant Voltage (CV) mode - power supply load testing
- Constant Resistance (CR) mode - resistor simulation
- Constant Power (CP) mode - wattage testing
- Battery capacity tester with automatic cutoff
- Discharge tester for 18650, LiPo, LiFePO4, lead-acid batteries

Smart Battery Testing Features
- Automated voltage cutoff protection for safe battery testing
- Battery type presets (Lithium, NiMH, Lead-Acid)
- Overheating protection monitoring
- Power bank tester and charger analyzer
- USB tester mode for PD/QC protocol analysis

Technical Specifications
- Supports Atorch DL24 (150W, 20A max)
- Supports Atorch DL24P (180W, 20A max)
- Voltage range: 0-150V (model dependent)
- Current range: 0-20A
- Bluetooth SPP protocol connection
- No rooting required

Perfect for:
- Electronics engineers testing power supplies
- Battery manufacturers for capacity testing and QC
- DIY enthusiasts testing battery packs and cells
- Power bank testing and validation
- Solar panel load testing
- Charger output verification
- Lab automation and data logging

Why Choose This Battery Tester App?
✓ Professional Atorch DL24/DL24P support
✓ Comprehensive data logging and CSV export
✓ Real-time battery discharge curves
✓ Multiple load testing modes (CC/CV/CR/CP)
✓ Battery capacity analyzer with mAh tracking
✓ Safe automated cutoff protection
✓ No ads in core functionality
✓ Regular updates and improvements

How to Use:
1. Turn on your Atorch DL24 or DL24P electronic load
2. Enable Bluetooth on your Android device
3. Pair with your load tester in the app
4. Select testing mode (CC, CV, CR, or CP)
5. Set parameters and start battery test
6. Monitor real-time data and discharge curves
7. Export test results as CSV for analysis

Compatibility:
- Atorch DL24 150W Electronic Load
- Atorch DL24P 180W Electronic Load (improved)
- DL24-USB with USB-C PD/QC support
- All firmware versions supported
- Android 5.0 and newer

Note: This is a third-party controller app for Atorch electronic loads. You need an Atorch DL24 or DL24P hardware device to use this battery testing app.

Keywords: battery tester, electronic load, Atorch DL24, DL24P, load tester, battery analyzer, capacity tester, discharge tester, power supply tester, battery testing, 18650 tester, lithium battery tester, power bank tester, USB tester

Download now and transform your Atorch electronic load into a professional battery testing station with comprehensive data logging and analysis capabilities!