XCANVehicle

[XCAN Vehicle Usage]

{How to set up your application}
1) Install XCAN Vehicle.
2) Activate the NFC function of the mobile phone (basic mode-Write / Read).
3) After selecting the menu suitable for Android and Apple models, select the desired application.
(If you use both your Android phone and iPhone at the same time, you can select both Android and IOS applications. Depending on the model, each application will run.)
4) Press the bottom WRITE button on the XCAN.
5) A pop-up window called Approach an NFC Tag will appear on the screen.
6) Put the smartphone on the device, the application to run automatically is input to NFC.
  (If you set both Android and IOS in step 3, you only need to enter it once.)
7) Remove the smartphone from the device for a while and put it back to run the application automatically set.
8) When changing the auto-run application, just run it again from step 1.

{URL input method}
1) Install XCAN Vehicle.
2) Activate the NFC function of the mobile phone (basic mode-Write / Read).
3) Select the URL button.
4) Enter the address to be executed automatically and press the OK button.
5) Press the bottom WRITE button on the XCAN.
6) A pop-up window called Approach an NFC Tag will appear on the screen.
7) If you put your smartphone on the device, the URL address to run automatically is entered into NFC.
8) Remove the smartphone from the device for a while and put it back to run the set URL.
9) When changing the URL, run it again from number 1.

[ main function ]
You can enter any application and URL you want in XCAN.
Available for both Android & Apple devices.
Set up and auto-launch your Android and Apple devices at the same time in one car fast wireless charger.


[Important]
Your phone must provide NFC.
Please turn on NFC for autorun
NFC is the default mode-Write / Read mode.
In card mode, the set application will not run.
Wireless charging is only possible if your device is capable of wireless charging.

Drive smart with XCAN