CLOMO MDM STARTER for Android

[Important] The present application is the app for kitting the Android 5 series / 6-based devices using the CLOMO MDM as Work Managed Device of Android for Work.

• When using the present application, it is possible to set the Android 5 series / 6 system as Work Managed Device with Android for Work. * 1
- Where it is used, Android for Work and Work Managed Device device you want to set as the * 2 using (or less, set the target device) and, set the target device to send the information device * 2 (below, setting source device) a Please prepare.
- This app, please perform the installation and initial configuration settings based on device. If you then set is brought into contact with the set target device to the original device, it will be set as the Work Managed Device that setting target device is using Android for Work.

- The following configuration information, can be sent to the set target device from the setting source device.
- Wi-Fi connection settings
- Proxy connection settings
- Time zone setting
- Locale setting
- Encryption skip setting

* 1: direct input of account information present in the Google domain corresponding to the Android OS 6-based devices, or, by any of the default setting using this app, you can set the Android for Work. The Android OS 5-based devices, only by the initial setting using this app, you can set the Android for Work.

* 2: The terms and conditions for the use of this function is the following.
- That the OS to set the target device / configuration based on the device both are Android OS 5-based / 6
- That they have the NFC as hardware to set the target device / setting source device both
- Set the target device is a factory state
- That Android for Work to utilize the Google domain available