AutoS

AutoS puts your warehouse shuttle fleet in your hands. Connect straight to the PLC over your local Wi-Fi network and run, monitor and tune every device from your phone or tablet - no laptop, no HMI terminal.

BUILT FOR THE WAREHOUSE FLOOR
Operators connect to a shuttle in seconds and drive a full cycle without leaving the aisle. Engineers get the parameter and IO detail they need for commissioning and fault-finding.

SUPPORTED EQUIPMENT
- 2-Way Shuttle
- 4-Way Shuttle
- Stacker Crane
- Lift + Conveyor
Works with Siemens S7-1200 and ET200 PLCs over S7 communication.

RUN OPERATIONS
Start inbound, outbound, compacting, multi-inbound, multi-outbound, recall and pallet-count cycles. Manual controls cover forward, backward, lift up and lift down at selectable speeds. Stop and clear-error are always one tap away.

SEE WHAT THE MACHINE SEES
- Live telemetry: position, speed, battery, load and running mode
- Alarm history with date-range filtering
- Raw IO signal state for every sensor, lock and light
- Pallet count results after each counting run

TUNE WITH CONFIDENCE
Read and write PLC parameters: distances, offsets, battery thresholds and the full speed profile for manual, home, putting and picking motion. Every write is confirmed before it is sent, and the parameter and IO pages sit behind a password so only authorised staff can change machine behaviour.

STAY CONNECTED
The app shows which Wi-Fi network you are on and detects a dropped PLC link immediately, so you are never left guessing whether a command landed.

ENGLISH AND VIETNAMESE
Full interface in both languages, switchable at any time.

REQUIREMENTS
AutoS is a companion app for Vinatech shuttle systems. It requires a compatible shuttle PLC reachable on the same local network and an account issued by your administrator. It is not a standalone app and has no function without this equipment.