Acondac

Acondac (Air Conditioning Data Analysis Control) is an independent app for the collection, analysis, and control of Acond Pro/Grandis N/R heat pumps. It allows you to connect your heat pump either via the local network or through the internet.
The app provides real-time information about the state of the compressor, circulation pumps, fan, and electric heater. Furthermore, it gives information about defrosting of the heat pump and hot water.

The main panel shows the current heat power of the heat pump, temperatures of outlets and inlets, the temperature of hot water, and also outside and inside air temperatures. Everything is on one screen to be easily readable.

The app downloads 7 days of data from the heat pump to your mobile phone to give you a detailed overview of its operation. In a table and interactive graphs, it shows you:
1) The amount of generated heat energy (separately for heating, hot water, and defrosting).
2) The amount of consumed electrical energy (also separately for heating, hot water, and defrosting).
3) The Coefficient of Performance (COP) and its relation to the outside air temperature (separately for heating and hot water).
4) The operational hours of the compressor (separately for heating, hot water, defrosting, and electric heater).
5) The temperature of hot water.
6) The outside and inside air temperatures.
7) All the above for various time ranges (today, yesterday, and the last 7 days).

The application very precisely measures the consumption of the outside unit of the heat pump. It is not able to measure the consumption of the additional circulation pump used inside.

In order to be able to set up the application, you need the following information: type of heat pump (Acond Pro/Grandis N/R) heat pump login, password, and IP address in your local network. This shall be listed in the handover document.
Additionally, to connect via the internet from anywhere in the world, you need your Acontherm login and password and the MAC address of the heat pump. This shall also be listed in the handover document.

Acondac version 2.0 and higher allows you to set economical and comfort inside temperatures. Furthermore, it allows you to set required temperature of the hot water and turn on/off blocking of its heating by the scheduled plan.