BAUR Fault Location Android

BAUR Fault Location

By: Baur GmbH App
BAUR Fault Location App makes pin-pointing a more efficient and gentler process

Overview

Features & Capabilities

With BAUR Fault Location App, pin-pointing becomes a safer, more efficient and gentler process.

Using BAUR Fault Location App for pin-pointing allows you to remotely control all essential functions of the titron® surge voltage generator via your smartphone or tablet:
• Switching the surge voltage generator on and off
• Setting the surge voltage and the surge interval (3s, 4s, 6s, 12s, single surge)
• Selecting the surge voltage range

This way, you have the possibility of only switching on the high voltage when you reach the pre-located fault location. Once the fault has been located, the high voltage can be switched off again. This means that the stress on the cable and the system is reduced to the necessary minimum and the level of safety is increased..

Advantages
• Less stress on the cable
• Less wear and tear to the system due to significantly reduced operating time
• Increased level of safety for the testing personnel and the environment
• More efficient fault pin-pointing due to the monitoring and adjustment of voltage parameters directly on site during the pin-pointing process

Location and fault position at a glance
Since the introduction of the BAUR Software 4 - Release 4.13 the cable data of the titron® and now also of the transcable are transmitted to the BAUR Fault Location App and, in combination with the street map, are displayed in the app. This allows you always to have the latest information on the
• cable route (if available)
• pre-located fault position
• location of the cable test van

Monitoring and adjusting the measurement parameters during the fault location
In the fault location mode, you always have an overview of the most important measurement parameters (available for the titron® only):
• High voltage status
• Output voltage, max. permissible voltage
• Surge sequence, surge energy
• SSG capacitor charge and discharge curve

Please note that your titron® system must be set up for remote control. For further information, contact your BAUR representative
( https://www.baur.eu/baur-worldwide ).

User Growth & Download Statistics

App
By:
Baur GmbH
Downloads:
1,785 2
Version:
2.0.3 Last updated: 2026-07-30
Version code:
18370
Creation date:
2017-04-20
Publisher country:
AT AT
Permissions:
  • android.permission.ACCESS_COARSE_LOCATION Very high risk
  • android.permission.ACCESS_FINE_LOCATION Very high risk
  • android.permission.CAMERA Very high risk
  • android.permission.INTERNET Low risk
  • android.permission.ACCESS_NETWORK_STATE Safe
  • at.baur.TitronRemoteControl.DYNAMIC_RECEIVER_NOT_EXPORTED_PERMISSION
Size:
24.89MB
Email:
he*****@baur.at
URLs:
Website ,Privacy policy
Full description:
See detailed description
Source:
Google Play Store
Data ingested on:
2026-08-04
Compare stats and ranking:

Contact the developer

Chrome-Stats does not own this Android app. Please use these information below to contact the Android app developer.
Developed by:
Baur GmbH
Google Play Store
https://play.google.com/store/apps/details?id=at.baur.TitronRemoteControl
Email:
he*****@baur.at
Website:
http://www.baur.eu

Best BAUR Fault Location Alternatives

Here are some Android apps that are similar to BAUR Fault Location: