# Wifi Rig CTRL

> Remote rig control over Wi‑Fi

Canonical page: [https://chrome-stats.com/d/id6788414941](https://chrome-stats.com/d/id6788414941)

## Overview

- **ID:** `id6788414941`
- **Platform:** Apple
- **Type:** Apple app
- **Status:** Available
- **Publisher:** JIRO UENO
- **Category:** Utilities
- **Version:** 3.10
- **Last updated:** 2026-09-23
- **First published:** 2026-07-08
- **Size:** 6.73 MB
- **Data as of:** 2026-09-24
- **Store listing:** [Apple App Store](https://apps.apple.com/us/app/wifi-rig-ctrl/id6788414941)
- **Privacy policy:** [https://github.com/ji1ore/Wifi\_Rig\_CTRL/blob/main/PRIVACY\_POLICY\_iOS.md](https://github.com/ji1ore/Wifi_Rig_CTRL/blob/main/PRIVACY_POLICY_iOS.md)

## Description

WifiRigCTRL is a controller app that lets you remotely operate an amateur (ham) radio transceiver from your iPhone or iPad over Wi-Fi.

Two ways to connect:
1. Via Raspberry Pi (Hamlib/FastAPI) — CAT control for a wide range of rigs, plus RX audio, CW, FT8 and APRS
2. Direct CI-V — connect to an IC-705 / IC-9700 on the same Wi-Fi, no Raspberry Pi required for basic operation

■ Features
- Real-time display of RX frequency, mode and signal strength (S-meter)
- Change frequency, mode, TX power, squelch and filter width
- Play received audio through the speaker (with noise reduction)
- PTT ON/OFF and microphone audio transmission
- Wi-Fi PTT (PTT control via external devices such as M5Atom)
- CW decoding (multi-station, up to 5) and CW transmit (presets, WPM control)
- BLE CW keyer support (connect DualKey-BLE / RemoteKeyer-BLE over Bluetooth)
- FT8/FT4 decode and transmit
- APRS beacon transmission (with smartphone GPS)
- Multiple profiles (switch between connection targets)
- API key authentication and remote access over WireGuard VPN

■ What you need (important)
This app does not work on its own. You must have one of the following (your own hardware):
- A set-up Raspberry Pi Zero 2W connected to your radio (Hamlib/FastAPI installed), or
- An IC-705 / IC-9700 (for direct CI-V connection)
Connect it to the same Wi-Fi network as your iPhone.
Raspberry Pi setup instructions and firmware are published on GitHub:
https://github.com/ji1ore/M5CoreHamCAT

■ Who it's for
For licensed amateur radio operators who have a compatible radio setup.

This app contains no ads and no usage tracking. Any information is used only on your device and is never sent to external servers.

## Rankings

- #1,715,001 — Overall

## Similar extensions and apps

- [SDR-Control Mobile](https://chrome-stats.com/d/id1673327509) — 4.50 / 5
- [TS Control for Kenwood](https://chrome-stats.com/d/id6738920189)
- [ShackPilot: Ham Radio Remote](https://chrome-stats.com/d/id6760430670) — 5.00 / 5
- [Ham Mixer Mobile](https://chrome-stats.com/d/id6759300753) — 5.00 / 5
- [FT Control for YAESU](https://chrome-stats.com/d/id6738919471) — 4.60 / 5
- [RIoT Control](https://chrome-stats.com/d/id1611328171)
- [K4 Control for Elecraft K4](https://chrome-stats.com/d/id6738920761) — 4.80 / 5
- [ECHOCAT - Ham Radio Remote](https://chrome-stats.com/d/id6766321194) — 5.00 / 5
- [RIoT Control Pro](https://chrome-stats.com/d/id1611332189)
- [ICOM CI-V Controller](https://chrome-stats.com/d/id6756515667)
- [rtl\_tcp SDR](https://chrome-stats.com/d/id1351164646) — 3.90 / 5
- [RadioMail Classic](https://chrome-stats.com/d/id1613839993) — 4.80 / 5

---

Source: [Chrome-Stats](https://chrome-stats.com/d/id6788414941)