# Sensor WiFi Connect

> Utilities

Canonical page: [https://chrome-stats.com/d/id6443695308](https://chrome-stats.com/d/id6443695308)

## Overview

- **ID:** `id6443695308`
- **Platform:** Apple
- **Type:** Apple app
- **Status:** Available
- **Publisher:** Informetis Co., Ltd.
- **Category:** Utilities
- **Rating:** 5.00 / 5 (1 ratings)
- **Version:** 1.2.3
- **Last updated:** 2026-06-29
- **First published:** 2023-08-08
- **Size:** 24 MB
- **Data as of:** 2026-09-06
- **Store listing:** [Apple App Store](https://apps.apple.com/jp/app/sensor-wifi-connect/id6443695308?l=en-US)
- **Privacy policy:** [https://www.informetis.com/privacy/](https://www.informetis.com/privacy/)

## Description

The Sensor WiFi Connect app allows the user to easily perform the Wi-Fi connection settings of the Informetis' Smart Sensor using a smartphone.

By connecting the smart sensor to your home Wi-Fi (WLAN) network, you will be able to monitor the energy usage status of your home via a dedicated app.
(The dedicated app differs depending on the company that installed the smart sensor. Please contact your installer for more information)

Wi-Fi connection settings can be configured from the app when the corresponding smart sensor is in the following states.
・If you have never configured Wi-Fi settings
・If you were able to connect once, but the connection was lost due to reasons such as replacing your Wi-Fi router.

This app can be used by people who have Informetis' power sensor "Circuit Meter CM-3/J" or "Circuit Meter CM-3/EU" installed in their homes, and by approved installers who install the smart sensor.
*Please note that it is not compatible with CM-2/J, CM-2/UK or CM-2/EU.

[Notes]
- The smart sensor may not be found immediately after turning on the power or performing a reset operation. Please start Wi-Fi setting process 3 minutes after power up.
・If you have already connected your iOS smartphone to the smart sensor, please perform the following steps and then configure the Wi-Fi connection settings again.
[Operation] Unregister "WiFiInt" from the device list on the Bluetooth settings screen
-The smart sensor only supports Wi-Fi in the 2.4GHz band. (It varies depending on the model, but in the case of xxxx-g and xxxx-a, please use xxxx-g.)

## Rankings

- #797,749 — Overall

## Similar extensions and apps

- [iSmart Connect](https://chrome-stats.com/d/id6448701078) — 1.00 / 5
- [SCT WiFiConnect](https://chrome-stats.com/d/id1571245733) — 4.50 / 5
- [Wi-Fi Smart Meter Setup Tool](https://chrome-stats.com/d/id1206398971)
- [ACS SmartConnect](https://chrome-stats.com/d/id1558284530)
- [iConNet - WiFi Powered by CTS](https://chrome-stats.com/d/id1557604606)
- [WiFi Smart Meter](https://chrome-stats.com/d/id1561930859)
- [Wireless Device Configurator](https://chrome-stats.com/d/id1531831585) — 5.00 / 5
- [Emfit Connect](https://chrome-stats.com/d/id6788718988)
- [Easy WiFi Config](https://chrome-stats.com/d/id1194919510)
- [Inspector Wi-Fi RD](https://chrome-stats.com/d/id1567001663)
- [Smart Connect App](https://chrome-stats.com/d/id1559510945)
- [SmartBridge Connect](https://chrome-stats.com/d/id6464058216)

---

Source: [Chrome-Stats](https://chrome-stats.com/d/id6443695308)