RadioScanProUBC125 USB OTG

V2.4
According to the latest Google guidelines, the user
must explicitly authorize access to an external Folder

So a dialog is given to select a folder to store your data it
can be any name but RdScanPro is a preferred name.
Tested ok with android 5-13.

You also will be asked for permission to record audio according to the latest Google guidelines, the user must give runtime permission if the audio jack is used. (Allow record audio.)

If the audio jack is used to decode Pocsag then Android sees this
as Record Audio but nothing is stored on the phone ,it is decoded.

This app needs a small OTG cable to connect the scanner to your phone or tab.

It's best to first try the free app RadioScanUBC125 to check if your device supports the use of this OTG cable.

In this PRO version more buttons and functions are available.

V2.0
- Run Time permissions needed for record audio.
- Morse decoding now on new screen.
- Pocsag decoding added.(experimental)
you will need to build a small circuit for this.
- Simple layout off the Excel Table added.
- Search screen stations names added if known.
- Text size TabA2016 error ,solved

V1.9
Problems with Product ID US solved.

V1.8
- Automatic Gain Control button added.
- Product ID's (US,Australia Regions) added

V1.7
Morse decode functions are added.
https://youtu.be/P0ecErNh85A
- PMorse - button decode Morse without a filter.
- GMorse - button decode Morse with 432 Hz filter.

V1.6
- Bank button added, shows free
channels and go to the chosen
bank

- Help screen
The help screen is not displayed at start-up

- Hold button (Search screen)
Hold on a current frequency.

- Lock button (Search screen)
It's possible to lock frequencies,a white line indicates the
locked frequency, so it's easier to see which frequencies are
locked,When lock is long-clicked all frequencies will be unlocked.

- Beep button (Search screen)
After each run a beep sound is heard,sound can
be switch on/off with this button.

- Progress bar (Search screen)
A progress bar is shown below the screen,it will be easier
to see where in the band the scanner is scanning.

- Listen to a frequency. (Search screen)
When the start frequency is the same as the end frequency ,the
scanner is put on hold on this frequency so listening is possible.

- Up button (Search screen)
The frequency is increased with the actual frequency step.

- Down button (Search screen)
The frequency is decreased with the actual frequency step.

- Listen to the found frequency.(clicked on listview) (Search screen)
First click the STOP button then a long-click on one of the
frequencies the search has found ,now listening to this frequency is possible.

Permission is needed to write and read to the /storage directory when installing this app , it is for writing and reading the table-files and the search log file,this is done in this location , so the user has access to these excel and log files.