BLOCK BATTLER

■How to play PLOCO
1. Assemble the blocks
Connect block parts and stick parts to create your own creations.
2.Start the reader/writer
When you turn on the power by sliding the switch on the side of the reader/writer, a green light will appear at the bottom center of the reader/writer's LCD.
The light will turn on.
When a second green light flashes next to the lit light, it is ready to scan.
3. Launch the app and scan
1) Launch the downloaded BLOCK BATTLER app.
2) If you want to battle, go to "Play Game" ⇒ "MODE SELECT" ⇒ "DIFFICULITY LEVEL".
3) Place the assembled blocks on the "DEVICE CONNECT" screen close to the reading section (liquid crystal) of the reader/writer.
I'll attach it.
4) If the reader/writer makes a beep sound, the reading is successful. Readers are distributed evenly throughout the entire work.
Scan multiple blocks by moving the target close to each other.
*If there is no sound, move the block closer to the LCD until it is in close contact with it, or change the block to be read.
4.About battle
1) Depending on the number of blocks read, the "attack type" or "physical strength type" will be determined.
2) The "attribute" is determined by the number of colors in the loaded block.
3) When the battle screen appears, load the "Special Block".
The strength of the special move changes depending on the performance of the special block.
4) Let's fight the assembled blocks according to the operations in the application.
*If the reader/writer light does not blink, try the following method.
• Check that the power of the reader/writer is turned on.
• Check whether the reader/writer is charged.
*If you do not hear a beep and the file does not load, please try the method below.
• Check if the BLOCK BATTLER application has the scan screen open.
• Restart the BLOCK BATTLER application or reader/writer.